1. Manuals
  2. Brands
  3. RGBlink Manuals
  4. Computer Hardware
  5. VSP 5360
  6. User manual

RGBlink VSP 5360 User Manual

Hide thumbs Also See for VSP 5360:
Table of Contents

Advertisement

Quick Links

Download this manual
VSP 5360
USER MANUAL
Article No: RGB-RD-UM-V5360 E001
Revision No: V1.6

Advertisement

Table of Contents
loading

Related Manuals for RGBlink VSP 5360

Summary of Contents for RGBlink VSP 5360

  • Page 1 VSP 5360 USER MANUAL Article No: RGB-RD-UM-V5360 E001 Revision No: V1.6...

  • Page 2: Table Of Contents

    3.6.1 Select the Output Resolution ..................... 30 3.6.2 Custom the Output Resolution ................... 30 3.7 Add or Clear the Layer ........................32 3.8 Set the Size and Position ......................33 3.9 Crop the Image ..........................34 3.10 Zoom the Image ........................35 VSP 5360 User Manual...
  • Page 3 Chapter 7 Appendix ............................. 64 7.1 Specification ..........................64 7.2 Software Upgrade .......................... 69 7.3 Installing Options ........................... 73 7.4 Using the Serial Cable ........................79 7.5 Terms & Definitions ........................80 7.6 Revision History ..........................84 VSP 5360 User Manual...

  • Page 4: Declarations

    RGBlink. If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.

  • Page 5: Operators Safety Summary

    Installation Safety Summary Safety Precautions For all VSP 5360 processor installation procedures, please observe the following important safety and handling rules to avoid damage to yourself and the equipment. To protect users from electric shock, ensure that the chassis connects to earth via the ground wire provided in the AC power Cord.
  • Page 6 Site Preparation The environment in which you install your VSP 5360 should be clean, properly lit, free from static, and have adequate power, ventilation, and space for all components.

  • Page 7: Chapter 1 Your Product

    Cable Screw Driver RCA to BNC Warranty Card & Antistatic Bag Cable USB Files QC Declaration Note: AC Power Cable supplied as standard according to destination market. USB is contained on the Warranty/Registration Card. Please keep. VSP 5360 User Manual...

  • Page 8: Product Overview

    VSP 5360 is based on module based design, can easily expansion input interfaces including USB inputs for media files play. VSP 5360 launches the new milestone for video scaler and switcher by introducing the latest 10 bit motion adaptive de-interlace, advance noise reduction and detail enhancement core processor.

  • Page 9: Back Panel

    Connect to the device with audio output connectors. Output Connectors BNC – 3G-SDI Loop Out Connect to the SDI input of the next VSP 5360 or the device with SDI input. DVI-I – DVI 22.23 Connect to the monitor or LED display which has DVI interface. (This connector does not support hotplug).

  • Page 10: Power Connection

    Range of inputs are available for user fitting. Refer to Product Input Options. Sender Card Slots Two Sender Cards can be installed in these slots. Support sender Card types including Linsn, Nova and Colorlight (sold separately). Refer to Product Sender Cards. VSP 5360 User Manual...

  • Page 11: Front Panel

    Push LOGO button in PRE bar, the preview will display LOGO if there is LOGO, or it is black. BLACK Button BLACK switch button, push the button, its LED light is on, program output will be VSP 5360 User Manual...
  • Page 12 These buttons used for layers choice. The LED light is on if the layer is open, and flashes when the layer is selected. Save Button Save all current settings with the VSP 5360 to 1 of the 12 available slots. For details, please refer to Saving Views.

  • Page 13: Dimension

    Chapter 1: Your Product 1.2.3 Dimension Following is the dimension of VSP 5360 for your reference: VSP 5360 User Manual...

  • Page 14: Chapter 2 Installing Your Product

    Turn the power switch on the rear of the product to the ON position. OLED display will show as below, completing initialization before loading last settings and input/output configuration. On delivery, CV1 will be the default input signal at 1920x1080@60, and the output format is defaulted to 1920×1080@60. VSP 5360 User Manual...
  • Page 15 Chapter 2: Installing Your Product 亮彩系列 AVDSP SERIES VSP 5360 Wait Init Device... Wait Init Device Finish！ PROGRAM CV1：1920X1080X60 PREVIEW CV2：1920X1080X60 OUTPUT FORMAT ：1920X1080X60 IP ADDRESS ：192.168.0.100 VSP 5360 User Manual...

  • Page 16: Chapter 3 Using Your Product

    Push the [MENU] button to enter the menu display. Turn the rotary knob to navigate to the menu item required. The  symbol shows the current item. Push the knob to select and enter into the menu item. As shown in the figure below: VSP 5360 User Manual...

  • Page 17: Understanding The Menu Structure

    Chapter 3: Using Your Product 3.2 Understanding the MENU Structure The MENU structure is shown in the figure below: VSP 5360 User Manual...

  • Page 18: Using The Menu

    Chapter 3: Using Your Product 3.3 Using the Menu Use the menu system for convenient and intuitive operation. VSP 5360 OLED display shows the menu items. The OLED display will show the default state when the menu is not in use, or the operation has timed out.

  • Page 19: Understanding The Main Menu

    There are 15 kinds of common resolutions. OTHERS FORMAT There are 25 kinds of others resolutions. CUSTOMIZED The special display project or LED display application would like to require special resolution settings to meet the requirement--refer to the Output Resolution. VSP 5360 User Manual...

  • Page 20: Screen Parameters Menu

    H TOTAL The total width points of LED display that will split. V TOTAL HORIZONTAL The total height points of LED display that will split. FIRST WIDTH The width of the device when do split. START X VSP 5360 User Manual...

  • Page 21: Input Setup Menu

    IMAGE Select NO MIRROR or H MIRROR. SETTING LAYER C MIRROR Select NO MIRROR or H MIRROR. LAYER D MIRROR Select NO MIRROR or H MIRROR. H POS Set the horizontal position. VGA ADJUST V POS VSP 5360 User Manual...
  • Page 22 Color blue setting. RESET If image quality distorts by improper operation, it can be recover by reset. USB OPERATE OPTION INPUT Turn the rotary to select the USB file. ADJUST H POS Set the horizontal position. VSP 5360 User Manual...

  • Page 23: Audio Setup Menu

    Select DP1 audio as INTERNAL embedded audio or EXTERNAL audio. Select DP2 audio as INTERNAL embedded audio or EXTERNAL audio. SDI1 Select SDI1 audio as INTERNAL embedded audio or EXTERNAL audio. 3.3.8 System Menu ->ETHERNET >> LOGO CAPTURE >> TEST PATTERN >> OUTPUT ADJUST >> VSP 5360 User Manual...
  • Page 24 OUTPUT DVI2 ADJUST Select the DVI MODE, BIT DEPTH and DATA RANGE, and set DE ADJUST. If image quality distorts by improper operation, it can be recover by reset. DVI OUTPUT VSP 5360 User Manual...
  • Page 25 Enable or disable the program/preview out IP function. When select “ON”, the program/preview out will switched to test pattern. There are 66 kinds of test patterns. If select <AUTO SWITCH>, VSP 5360 will output all the test patterns one by one, and the interval between is 1 to10S.
  • Page 26 The device will not work if excess the prescribed time, there are no signal output, it needs to input password and modify the using time to continue to work. CAN USE TIME Display the rest of the working time. USB UPDATE User can upgrade the device by USB. VSP 5360 User Manual...

  • Page 27: Language Menu

    ->FACTORY RESET >> SAVE IP RESET >> FACTORY RESET Select “YES” or “NO”. Select “YES” to restore default settings. SAVE IP RESET Select “YES” or “NO”. Select “YES” to restore default settings, but keep the IP. VSP 5360 User Manual...

  • Page 28: Screen Preview Setting

    4. Push the knob to confirm, and enter to the 3 screen preview modes. 3.4.2 3 Screen Preview Setting VSP 5360 supports 3 Layers Preview and 3 layers Program seamless switching, select the layer, set on Preview output, and switch it to the program output by the [CUT] or [TAKE] button.

  • Page 29: Preset

    User can load the saved settings by pushing the [Load] button. For example, push button 1, the SAVE 1 will display on preview monitor, then touch [TAKE] button to switch it to the program display after confirmation. VSP 5360 User Manual...

  • Page 30: Single Image Switching

    Chapter 3: Using Your Product 3.5 Single Image Switching VSP 5360 can realize seamless effects switch between two channels, select the signal in PRE area, then push [CUT] or [TAKE] button, the signal will be switched to LED display. For example, switch VGA1 to LED display, first push the [VGA1] button in PRE area, then push [CUT] or [TAKE] button, and the LED display will show VGA1 signal.

  • Page 31: Set The Output Resolution

    1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select <OUTPUT FORMAT>: ->OUTPUT FORMAT >> SCREEN PARAMETERS >> SPLIT >> INPUT SETUP >> 2. Push the rotary to confirm, and enter to the menus as below: VSP 5360 User Manual...
  • Page 32 60 as following. Use the digital buttons to finish the settings. CUSTOMIZED ->1536×1536×60.0 7. After input all the values, push the rotary knob to enable VSP 5360 to output this resolution. VSP 5360 will take 5~10 seconds to enable this output resolution. VSP 5360...

  • Page 33: Add Or Clear The Layer

    In LAYERS area, push any key of button A, B, C, D that to clear, the button light flashes. Push the button again, key light is off, and clear layer finished. For example, clear layer B, OLED panel shows as follows: OFF LAYER B VSP 5360 User Manual...

  • Page 34: Set The Size And Position

    H POS: Horizontal phase setting. V POS: Vertical phase setting. FAST SCALE MODE: User can choose FULL SIZE, SCREEN SIZE, 16:9 or 4:3. RESET: If image quality distorts by improper operation, it can be recover by reset. VSP 5360 User Manual...

  • Page 35: Crop The Image

    2. The lights of number button 0~9 are on, user can crop H LEFT, V UP, H RIGHT, V DOWN of the image by knob or number buttons. 3. If image quality distorts by improper operation, it can be recover by reset. VSP 5360 User Manual...

  • Page 36: Zoom The Image

    H LEFT/RIGHT: Zoom in horizontal but in both left and right direction from its middle. CENTER: Zoom in 4 corner direction from center. RESET: If image quality distorts by improper operation, it can be recover by reset. VSP 5360 User Manual...

  • Page 37: Set The Brightness And Color

    Note: Users can set according to their actual situation, this function mainly suitable for these professional operator who knows how to set the image quality correctly. Others are not comments to do these operations. If image quality distorts by improper operation, it can be recover by reset. VSP 5360 User Manual...

  • Page 38: Logo Capture

    3. Freeze image, when capture LOGO, the program image should be frozen. 4. Set the LOGO horizontal position, vertical position, horizontal size and vertical size. 5. Save the image to LOGO1 or LOGO2. 6. Start to capture LOGO. Note The [LOGO] button can also fulfill this setting. VSP 5360 User Manual...

  • Page 39: Screen Size Setting

    Chapter 3: Using Your Product 3.13 Screen Size Setting VSP 5360 supports the screen parameters to meet the requirement where user want to switch between scale screen size and full display size (like monitor). This is only enable for a single display window.

  • Page 40: Dsk Setting

    Turn the knob and select <PRESET>, push the knob to confirm, select the preset mode of DVI3, for example, WhOnBk2, push the knob to confirm. SELECT INPUT DVI3 WhOnBk2 ->PRESET ALPHA 5. Push the [SAVE] button, and save the above settings. VSP 5360 User Manual...

  • Page 41: User Define Black Key

    LICENSE SETUP >> After selecting <FREEZE>, push the button, its LED light is on, and freeze the image. FREEZE IMAGE Push the button again, its LED light is off, and output the video image. VIDEO IMAGE VSP 5360 User Manual...

  • Page 42: User Define Dsk Key

    LICENSE SETUP >> After selecting <FREEZE>, push the button, its LED light is on, and freeze the image. FREEZE IMAGE Push the button again, its LED light is off, and output the video image. VIDEO IMAGE VSP 5360 User Manual...

  • Page 43: Using Black Out

    3.17 Using Black Out Black out description: BLACK signal realizes one-key-touch to the black screen. VSP 5360 BLACK provides effect processing for Program output and Preview output with fade in fade out effect. Operations are as follows: 1. Select output signal.

  • Page 44: Saving Views

    Chapter 3 : Using Your Product 3.18 Saving Views VSP 5360 provides 12 positions for saving or recording parameters. To save current parameters and settings: 1. Push the [Save] button, the button light is on, and enable the SAVE function.

  • Page 45: Recall Saved Settings

    Chapter 3: Using Your Product 3.19 Recall Saved Settings VSP 5360 provides 12 positions for saving or recording parameters. To recall saved settings: 1. Push the [Load] button, the button light is on, and enable the LOAD function. Some of the number buttons 0~12 in PRE area are on and some flash. The buttons on is ready for recall, and flashes means just recall.

  • Page 46: Chapter 4 Controlling Your Processor Remotely

    Chapter 4 Controlling Your Processor Remotely 4.1 Install the Software Double click to install, default English version, click “next”: And in next dialog is the user agreement of the software, click Agree to go on: VSP 5360 User Manual...
  • Page 47 Chapter 4: Controlling Your Processor Remotely User can select “Change” to choose the VSP 5360 install software: Click “Next”: Click “Next”: VSP 5360 User Manual...
  • Page 48 Chapter 4: Controlling Your Processor Remotely Click “Next” to go on: Click “Finish” and ready to run VSP 5360 console: VSP 5360 User Manual...

  • Page 49: Use The Software

    VSP 5360 communication software interface as shown: Connection Besides the power cord, the product equipped with the DB9 to RJ11 cable to connect VSP 5360 to the windows control program. Note RS 232 port and USB port can do 100M program upgrade.

  • Page 50: Basic Operation

    Program Screen Right part is program screen, the top left corner shows input signal information, VSP 5360 User Manual...
  • Page 51 Set the X, Y, Width and Height according to actual need. Click Set after finish. If image quality distorts by improper operation, it can be recover by reset. Set the alpha, the setting range is among 0 to 128. Enable or disable the PIP function, VSP 5360 supports 12 kinds of PIP modes. Fade time setting. Layer Add or clear the layer by selecting Layer 1, Layer 2, Layer 3 or Layer 4.
  • Page 52 Mirror Rotate: User can select None, Left 90 and Right 90. Mirror: User can select None, H Mirror, V Mirror and HV Mirror. VSP 5360 User Manual...
  • Page 53 Mirror Rotate: User can choose None, Left 90 and Right 90. Mirror: User can choose None, H Mirror, V Mirror and HV Mirror. VSP 5360 User Manual...
  • Page 54 Set the brightness, contrast, sharpness, saturation and color temp. If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting. Mirror Rotate: User can select None, Left 90 and Right 90. VSP 5360 User Manual...
  • Page 55 Set the brightness, contrast, sharpness, saturation and color temp. If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting. Mirror Rotate: User can select None, Left 90 and Right 90. VSP 5360 User Manual...

  • Page 56: Tools

    Select input source and freeze image, set the position and size, and save to Logo 1 or Logo 2, then start logo capture. Output Adjust Select output port, output mode, output type, etc, and set the parameters. VSP 5360 User Manual...
  • Page 57 Enable the DSK switch function, select title input source, default mode and set value, and set the alpha and color. EDID User can read, write and custom EDID. Audio Choose input audio and set the volume. VSP 5360 User Manual...

  • Page 58: Control

    Chapter 4: Controlling Your Processor Remotely Option Input Set the position of the option input, anti-alias processing is available for SDI signal. Control Device Update VSP 5360 User Manual...

  • Page 59: Language

    Advance Debug：User should input the password in the “Admin Password” dialog for advance debug. Note Advance is only done by engineer. If need, please connect us for password. Help Version Explain: Show the content of software update history. About: Show software version and company information. VSP 5360 User Manual...

  • Page 60: Refresh

    Chapter 4: Controlling Your Processor Remotely Refresh Refresh the current page. Information Toolbar It shows the VSP 5360 software version, core board version, firmware version and the serial number in the bottom of the software interface. VSP 5360 User Manual...

  • Page 61: Chapter 5 Ordering Codes

    Chapter 5 Ordering Codes 5.1 Product 100-5360-01-0 VSP 5360 5.2 Options 5.2.1 Input Options 190-0628-01-0 Dual CVBS/Composite Input Module 2 × CVBS 190-0628-02-0 Dual USB Input Module 2 × USB 190-0628-03-0 Dual VGA Input Module 2 × VGA 190-0628-04-0 Dual HDMI Input Module 2 ×...

  • Page 62: Chapter 6 Support

    LED Display only displays part of the image Question Scale the Image Troubleshooting Push [Scale/Position] button in the processor and knob to adjust the actual screen size of the screen, including “H Size”, “V Size”, “H Pos”, “V Pos” and VSP 5360 User Manual...

  • Page 63: No Display In The Second Half Of Led Display

    Check If Dial Switch is Normal Shut the power, check if two red dial switches near CV are upward. Reboot if Troubleshooting they face down, and reboot. The function of the red dial switched is mainly upgraded. VSP 5360 User Manual...

  • Page 64: Contact Us

    Chapter 6: Support 6.2 Contact Us VSP 5360 User Manual...

  • Page 65: Chapter 7 Appendix

    30/36 bit (each primary 10/12 bit) Supported Bandwidth 10.8Gb/s Format Standard DP1.1 3G-SDI Input Number of Inputs Connector 2.97Gb/s, 2.97/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s Data Rate 270Mb/s SMPTE 425M (Level A and Level B), SMPTE424M, SMPTE 292M, Supported Standard SMPTE 259M-C and DVB-ASI VSP 5360 User Manual...
  • Page 66 VESA: 800×600@60 | 1024×768@60 | 1024×768@75 | 1024×768@85 | 1280×720@60 | 1280×768@60 | 1280×800@60 | 1280×1024@60 | 1360×768@60 | 1366×768@60 | 1400×1050@60 | 1440×900@60 | 1600×1200@60 | 1680×1050@60 | 1920×1080@60 | 1920×1200@60 | 2048×1152@60 | 2560×816@60 VSP 5360 User Manual...
  • Page 67 Board Size 93.8(L)×17(W)（mm） SDI Input Number of Inputs Connector ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292, SMPTE 297 Supported Standard Belden 1694A 100m self-adaptive 3G,200m self-adaptive Balance 1.485G,350m self-adaptive 270Mbps SDI Loop Out Number of Inputs Connector VSP 5360 User Manual...
  • Page 68 Board Size 93.8(L)×17(W)（mm） DP Input Number of Inputs Connector DisplayPort Supported Resolution VESA: 3840×2160×24 I 3840×2160×25 I 3840×2160×30 SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC, 1080P50/59.94/60 I 1080i50/59.94/60, 720p50/59.94/60 Supported Bandwidth 21.6Gb/s Format Standard DP 1.2 DP Loop Out VSP 5360 User Manual...
  • Page 69 Support each input channel signal programming configuration Switch Support any two inputs fade in fade out Extras Communication RS232 USB UDP/IP Power Supply 85-264V IEC-3 Working Environment 0°C~45°C Stored Environment 10% to 90% Product Warranty 3 years parts and labor warranty VSP 5360 User Manual...

  • Page 70: Software Upgrade

    Chapter 7: Appendix 7.2 Software Upgrade If the version of VSP 5360 is older than V6.2.2R,need to upgrade the MCU repair file VSP5360_V2.51R.MCU first. Upgrade step (from left to right): Communication firmware core processing firmware. 1. Communication Firmware Upgrade (1) Connect the device to PC via USB cable.
  • Page 71 Chapter 7: Appendix (3) Click to configure the parameter like below: (4) Select upgrade file as shown below, choose “ALL” and click “Upgrade”, like below: VSP 5360 User Manual...
  • Page 72 (5) If all the upgrade firmwares show OK like below ,the upgrade is succeed. (6) If some of upgrade firmwares failed, click and re-upgrade the failed files accordingly as shown below: (7) Power on VSP 5360 to view the version, step: MENUSYSTEMSYSTEM INFOCONT VER. 3. Version amendment description Date Version...
  • Page 73 2. Add output matrix feature. 20150211 V5.1.0 1. DVI3 input supports customized resolution. 2. Add CP 2048 control VSP 5360. 20150123 V5.0.1 1. Add fade in fade out feature under “Load” feature. 2. Change some bugs of Logo.

  • Page 74: Installing Options

    VSP 5162PRO, VSP 5360 and VSP 628PRO are based on module based structure, user can install or replace the optional module according to actual need. The installation steps of VSP 5162PRO, VSP 5360 and VSP 628PRO are the same. Here we take VSP 628PRO for example, specific steps are as follows: Install the Optional Module 1.
  • Page 75 Chapter 7: Appendix (Figure 2) 4. Push the input module into the input module slot, and fix it with 2 fixed screws (Figure 3): VSP 5360 User Manual...
  • Page 76 5. Embed the input module block in the input module slot, and fix it with 2 fixed screws (Figure (Figure 4) 6. Assemble the top panel, and fix it with 5 fixed screws that removed in step 2, then optional module installation is finished (Figure 5): VSP 5360 User Manual...
  • Page 77 Note: There is the case that some customers connect the power cord of the sending card to the F optional module, shown as Figure 8. This is not allowed to happen, or the F optional module will be damaged. VSP 5360 User Manual...
  • Page 78 The install steps for optional module replacement are the same as above, but the following need to note: 1. Take apart the top panel, and unscrew the 2 fixed screws on input optional module to remove it (Figure 9). VSP 5360 User Manual...
  • Page 79 3. Push the input module into the input module slot, the install steps are the same as step 4 to step 6 in “Install the Optional Module” part. Note: The install steps for output optional module replacement are the same as above. VSP 5360 User Manual...

  • Page 80: Using The Serial Cable

    Chapter 7: Appendix 7.4 Using the Serial Cable Serial cable is used with selected RGBlink products to access remote commands via a serial interface. Following is the picture of the serial cable -- RJ11/DB9. And connections are shown as follows:...

  • Page 81: Terms & Definitions

    Color burst is 3.58 MHz for NTSC and 4.43 MHz for PAL.  “Color temperature”: The color quality, expressed in degrees Kelvin(K), of a light source. The higher the color temperature, the bluer the light. The lower the temperature, the VSP 5360 User Manual...
  • Page 82 JPEG typically achieves 10:1 compression with little perceptible loss in image quality. Produces blocking artifacts.  “MPEG”: Motion Picture Expect Group. A standard committee under the auspices of the VSP 5360 User Manual...
  • Page 83 Low saturation is like adding white to the color. For example, a low-saturated red looks pink.  “Scaling”: A conversion of a video or computer graphic signal from a starting resolution to a new resolution. Scaling from one resolution to another is typically done to optimize the VSP 5360 User Manual...
  • Page 84 640×480 with a color palette of 16 bits and 256,000 colors.  “YCrCb”: Used to describe the color space for interlaced component video.  “YPbPr”: Used to describe the color space for progressive-scan (non-interlaced) component video. VSP 5360 User Manual...

  • Page 85: Revision History

    5. Add “3 Screen Preview Setting” and “User Define DSK Key”. 6. Update “Software Upgrade”. 7. Update the specification. V1.6 2016-11-01 0006# 1. Add the description of the audio Vira interface. 2. Add “Using the Serial Cable.” VSP 5360 User Manual...

Table of Contents