Table of Contents
Advertisement
OSD:
Q16pro Gen2 output modules which support OSD are
shown below: (Please Turn ON Status before setting)
●Quad HDMI 1.3 Output Module
●Quad 3G SDI Output Module
●Quad DVI Output Module
●Dual HDMI 2.0 Output Module
●Single IP Output Module (preliminary)
●Dual HDMI 1.3 Output Module with Dante (preliminary)
Order Codes please refer to
Output Port : current output port.
Status : ON/OFF OSD.
X/Y：the starting horizontal and vertical position.
Width/Height: the horizontal and vertical size of the text.
Font: font of the text, all fonts installed in the computer
are available.
Font Type : Normal, Italic, Bold, Bold Italic.
Font Size : 0-300 pixels.
Alignment：set alignment type.
Background: choose transparent background or set
background color.
Scroll Speed: 0-16.
Scroll Direction: Scroll Off, Scroll Left.
Input Text: The exact content of the text.
The user can customize OSD content or choose Clear
OSD (If the setting is not desired) or Close All OSD.
After all settings done, click <Set> and the OSD will
be displayed on the screen.
LOGO: Users need to pre-store the Logo on the
SD card for Logo capture.
Output Port: current port。
Logo Operation：
Logo Capture：
Logo ID: Load Logo ID been saved
Status: Hide/Show Logo
X/Y: Horizontal and vertical position of Logo
Delete Logo: Clear logo set already
Q16pro Gen2
4.2.2 Output
Modules.
User Manual
51
Advertisement
Table of Contents
