Table of Contents
Advertisement
Under Matrix Mode, [ ALL] key is on, as shown in the figure below.
In Matrix Mode, you can select input signal from [IN 1-16] and output signal from [OUT 1-16].
Example 1: Switch input 1 to output 5 (Input signal 1 not been used in any output ports before.)
Step 1: Select [ IN 1] and the light will be ON to indicate that the input signal 1 has been selected.
Step 2: Select [OUT 5], [OUT 5] light will be ON and the output port 5 will display input signal 1.
The input and output relationship will change accordingly on LCD screen.
Example 2: Switch input 1 to output 7 and output 8 (Input signal 1 been used in output port 5
already.)
Step 1: Press [IN 1] and CPX auto detects the matching relationship set before. That is, lights of [IN
1] and [OUT 5] will be ON after number [IN 1] is pressed because Input signal 1 has been used in
Q16pro Gen2
User Manual
29
Advertisement
Table of Contents
