RGBlink Q16pro Gen2 User Manual page 31

output port 5 in example 1.
Step 2: Now press [OUT 5] to stop displaying input signal 1 on output port 5. Light of [OUT 5] will
be OFF.
Step 3: Press [OUT 7] and [OUT 8] and lights will be ON. Input signal 1 has been used on output
port 7 and 8.
User can check input and output relationship shown on CPX screen to ensure successful signal
exchange.
3.1.4.2 OSD Mode
Press [ SAVE ] key on the panel to enter OSD Mode and the light of [ SAVE ] is ON.
In OSD Mode, users can use numeric key [IN 1-16] to load OSD 1 to output ports 1-16; and [OUT
1-16]to load OSD 2 to output ports 1-16.
Press [SAVE] key and CPX will automatically detect the relationship between OSD and
corresponding output ports.
Q16pro Gen2 User Manual
30