Table of Contents
Advertisement
TCD Analyzer
The Span Calibration Run screen has a Back arrow button
when pressed DURING A CALIBRATION will bring up a display
which will allow the abort the calibration without saving. Use the Yes
or No buttons to reply.
"Yes" will ABORT the calibration and move back to the Menu
screen.
"No" will continue the calibration.
After the calibration has FINISHED, pressing the Back arrow will
bring up a similar requester.
4.8.2.2 S
M
PAN
ANUAL
When the Span calibration mode is set to MAN and the "Touch to
Start the Calibration" button is pressed, the Span Run screen is
displayed.
Span Cal Manual Mode Run screen:
The Manual Calibration ENTER button is used to save the
calibration factor value and will only appear in the Manual calibration
mode. Everything else operates the same way.
Teledyne Analytical Instruments
M
R
S
ODE
UN
CREEN
Operation
that
97
Advertisement
Table of Contents
