Teledyne 2000RS Operating Instructions Manual page 4

Thermal Conductivity Analyzer
Specific Model Information
The instrument for which this manual was supplied may
incorporate one or more options not supplied in the standard instrument.
Commonly available options are listed below with check boxes. Any
that are incorporated in the instrument for which this manual is supplied
are indicated by a check mark in the box.
Instrument Serial Number: _______________________
Options Included in the Instrument with the Above Serial Number:

19" Rack Mount:

Auto Cal:

Sealed-Air
Teledyne Analytical Instruments
The 19" Relay Rack Mount units are
available with up to four 2000RS series
analyzers installed in a custom 19" chassis and
ready to mount in a standard instrument rack.
This analyzer includes optional internal
Sample, Span, and Zero solenoid valves. This
option allows the selection of Sample, Zero, or
Span gases which are attached to the rear of the
analyzer.
This analyzer includes an optional sealed gas
TCD sensor. Analyzers with this option do not
require a flowing reference gas.
iii