Operation
4.7.1 Alarm Setpoint
To define the alarm setpoint, touch the ALARM 1 or ALARM 2
Threshold edit box to bring up a numerical keypad.
Alarm 1 Threshold set:
Note: Alarm 1 is shown, Alarm 2 is identical.
Enter the alarm setpoint using the keypad.
1. Click the "DEL" button to delete the one character at a time
from the Edit box.
2. Click the "ENT" Button to store the values and move back to
the parent (Range) screen.
3. Click the "back arrow" to move to the Alarm screen without
saving any edited values.
Use the same procedure for setting Alarm 1 or Alarm 2 setpoint.
(Remember, the setpoint units are ppm O
parameters touch the edit box for the parameter.
4.7.2 HI/LOW Alarm
To set whether the alarm is a HIGH or LOW alarm, touch the
HIGH/LOW edit box and toggle the value to the desired configuration.
4.7.3 Alarm Defeat
The user can defeat either or both the alarms by toggling the Defeat
edit box between OFF (defeat) or ON (active).
Teledyne Analytical Instruments
.) To set the other alarm
2
2000RS
84