Table of Contents
Advertisement
6.8.1
Grade dial-in with
Combo
step-by-step
Applications
2.
Press the Power button to turn on the Rugby. Allow the Rugby
to self-level.
☞
The Rugby will always turn on in Automatic Mode.
3.
In sideways operation the laser beam points downwards for
alignment over your reference automatically.
4.
Start the head rotation or scanning motion to roughly align the
beam to a second control point.
5.
Press the Smart Target button, navigate to the Slope Catch fea-
ture and press the OK/Grade button.
☞
When the Slope Catch process is complete, the Combo
alerts you.
Once aligned the split beam and rotating beams can be used
☞
to locate 90° angles for layout. The rotating beam also creates
a vertical plane for transferring points from the floor to the
ceiling.
Grade Dial-in with Combo
5
4
3
0015875_001
1.
Set up the Rugby on a tripod.
2.
Set up the Rugby and the tripod in line with one axis of the job and
align the top of the Rugby in the direction of the axis.
3.
Turn on the Rugby.
4.
Press the OK/Grade button.
5.
Press the Up/Menu button or Down/Sleep button to select an axis.
6.
Press the OK/Grade button to confirm your selection.
1 + 2
67
Advertisement
Table of Contents
