Table of Contents
Advertisement
Beam down mode
Combo
With a new Rugby and Combo package, the Rugby and the Combo
☞
come pre-paired.
If the Combo has to be paired with one or more Rugby lasers (depending on
functionality package in operation), do the following:
1.
Turn on the Rugby and the Combo.
2.
Enter the menu screen on the Combo.
3.
Select the pairing search menu.
The searching process begins.
☞
When the search is successful:
At least one laser icon or maximum five laser icons appear. To estab-
lish which the desired Rugby is, cycle through the icons and observe
which Rugby gives an alert. The Rugby displays a flashing screen and
gives an audio feedback.
When the search is not successful:
☞
Either no Rugby lasers are found or the desired Rugby is not avail-
able.
4.
Press the OK/Grade button to select the Rugby.
16017_002
When the Rugby is operated lying on its side the beam down mode is
☞
activated automatically.
For layout work, use the Beam down mode to posi-
tion the beam over a reference point. Then use the
Scan mode to move the small scan quickly to a posi-
tion to the left or right of the Rugby.
Alternatively, press Beam down to stop the rotating
head (0 rps). Refer to
4.3.2 Menu Set 1-Head
speed.
41
Advertisement
Table of Contents
