Laser Classification; General; Distancer, Measurements With Reflectors - Leica TS12 Lite User Manual

Hide thumbs Also See for TS12 Lite:
Table of Contents

Advertisement

1.6
1.6.1

General

1.6.2
General
Labelling
TS12 Lite, Safety Directions

Laser Classification

General
The following chapters provide instructions and training information about laser safety
according to international standard IEC 60825-1 (2007-03) and technical report IEC TR
60825-14 (2004-02). The information enables the person responsible for the product
and the person who actually uses the equipment, to anticipate and avoid operational
hazards.
According to IEC TR 60825-14 (2004-02), products classified as laser class 1,
class 2 and class 3R do not require:
• laser safety officer involvement,
• protective clothes and eyewear,
• special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard
level.
National laws and local regulations could impose more stringent instructions
for the safe use of lasers than IEC 60825-1 (2007-03) and IEC TR 60825-14
(2004-02).

Distancer, Measurements with Reflectors

The EDM module built into the product produces a visible laser beam which emerges
from the telescope objective.
The laser product described in this section is classified as laser class 1 in accordance
with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
These products are safe under reasonably foreseeable conditions of operation and are
not harmful to the eyes provided that the products are used and maintained in accord-
ance with this User Manual.
Description
Maximum average radiant power
Pulse duration
Pulse repetition frequency (PRF)
Wavelength
Beam divergance
Class 1 Laser Product
according to IEC 60825-1
(2007 - 03)
a
003730_001
a) Laser beam
Value
0.33 mW
800 ps
100 MHz - 150 MHz
650 nm - 690 nm
1.5 mrad x 3 mrad
Art.No.:
Type: TS....
. . . . . .
Equip.No.: . . . . . .
S.No.:
Power: 12V/7,4V ---, 1A max
. . . . .
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: . . . .
25
Made in Switzerland
Complies with FDA performance standards for laser
products except for deviations pursant to Laser Notice
No.50, dated June 24, 2007.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
10

Advertisement

Table of Contents
loading

Table of Contents