Grade entry by digit
Operation
4.
Press the OK/Grade button to confirm the selection.
5.
Press the Power/ESC button for a short time to
exit the grade entry mode.
The Main screen appears.
On the Combo press the OK/Grade button once
☞
to start the grade entry mode.
1.
Select the axis and press the Left/Bandwidth
button or Right/Volume button to create a
cursor. The cursor always appears on the plus/
minus sign.
2.
Select the grade value.
3.
Press the Up/Menu button or Down/Sleep button
to change the grade value.
Press the Left/Bandwidth button or Right/Volume
button to change a digit.
4.
Press the OK/Grade button to confirm the selection.
0016016_001
31