Combo receiving win-
dow modification
4.3.4
Overview
Combo
Centre line offset is not compatible with Combo window size.
☞
To reset the offset, press the OK/Grade button when no beam is
☞
detected on the window.
Combo window modification is not compatible with Centre line offset.
☞
Grade Entry
Grade entry screen
1.
Move the Combo so the beam is on the desired
centre line position.
Press the OK/Grade button to confirm the new
2.
centre line position.
The default height of the Combo window is 120
mm/4.72 inches.
The height can be reduced by 50 mm/1.97 inches.
Press the Up/Menu button and Down/Sleep but-
1.
ton to modify the window size.
2.
Press the OK/Grade button to confirm the new
window size.
In the Grade entry screen you can modify the grade
values and select the following parameters, depend-
ing on the functionality package in operation:
Automatic/Manual Mode
•
Display - Percent/Per Mil
•
Display - Thousandths/Hundredths
•
Save Grade Enabled/Disabled
•
Negative Grade Enabled/Disabled
•
☞
To exit the menu, press the Power/ESC
button for a short time.
49