Leica Rugby CLA User Manual page 42

Beam masking
Scanning mode
42
Beam masking
screen
Possible combina-
tions
008451_001
Example
The default Rugby scan setting is a 360° range of movement. It is possible,
though, to restrict the beam to certain predefined ranges. Go to the Scanning
mode screen to alter the beam range in terms of width, direction and axis.
Beam masking allows you to turn off the laser
beam on selected sides of the Rugby. It prevents
interference with other lasers or receivers that
could be working in the same working area.
☞
Additionally, beam masking is useful
when you work in a sensitive environ-
ment, close to public eyeline or near
reflective surfaces.
You can choose to block two quarters or three
quarters of the rotating laser beam.
Each of the four displayed combinations is available
in four different variants. The dark area represents
the area where the laser beam is turned off.
Use the Up/Menu button and Down/Sleep button or
Left/Bandwidth button and Right/Volume button to
choose from the 16 possible combinations over 2
pages.
Combo