Table of Contents
Advertisement
Automatic axis align-
ment step-by-step
Applications
The Rugby searches for the Combo on the X-axis until it is found and
•
locked on grade.
Once found, the Rugby drives grade into the Y-axis and monitors the
•
position of the beam on the Combo.
The Rugby electronically compensates for any misalignment by adjusting
•
the beam until it is again locked on the Combo.
The procedure is then complete and the Rugby returns to the grades that
•
you entered. The Rugby is now properly aligned.
3
4
x5
16933_001
1.
Setup the Rugby on a tripod at point A, on the axis to be aligned.
Adjust the axis by rotating the Rugby by hand and observing the
alignment marks on the top of the Rugby, until it is approximately
aligned.
2.
With the Combo in hand, enter the grade values for the X-axis and
Y-axis, if needed. Then, move with the Combo in the direction the
Rugby should align itself with.
3.
Press the Smart Target button to select a Smart Target feature.
4.
Select Axis Alignment by navigating the menu.
5.
With Axis Alignment selected, press the OK/Grade button. The
Rugby starts to search for the Combo.
An hourglass is displayed for up to two minutes, while the process is
running.
When the process is complete, a tick icon indicates success, or a
cross for failure.
6.
When the Axis Alignment screen has been exited, the AA icon
indicates the axis has been modified.
1 + 2
5
6
71
Advertisement
Table of Contents
