Leica Rugby CLA User Manual page 44

H.I.Alert - On/Off
Sensitivity
44
H.I.Alert select
How does the H.I.Alert function work
The Height of Instrument (H.I.) or Elevation Alert function prevents incorrect
work caused by movement or settling of the tripod that would cause the
laser to self-level at a lower height.
30 seconds after the Rugby has levelled and the head of the laser starts
rotating, the H.I.Alert function becomes active.
H.I.Alert activated
You can choose to enable or disable the H.I.Alert
function:
On
•
Off
•
When enabled, the H.I.Alert function turns on auto-
matically every time the Rugby is turned on. The
function becomes active 30 seconds after turning
on the Rugby.
When this feature is disabled, a small icon appears
momentarily on the Rugby, in place of the last digit.
☞
When the H.I.Alert is disabled, a small
icon is shown on the Combo and Rugby.
The H.I.Alert function monitors the movement of
the laser; if disturbed, the H.I.Alert screen flashes
and the Rugby beeps rapidly.
To stop the alert, turn the Rugby off and on again.
Check the height of the laser before beginning to
work again.
Refer to 10 Troubleshooting-Alerts and message
screens.
☞
The H.I.Alert function turns on automatic-
ally every time the Rugby is turned on.
While in use, the Rugby responds to disturbances,
for example wind or vibrations, and stops the head
rotation, if necessary. You can choose between two
levels of sensitivity:
Sensitivity Setting 1: For normal performance -
•
wind, vibration and other disturbances are min-
imal.
Sensitivity Setting 2: For situations when wind,
•
vibration and other disturbances are more
severe.
Combo