Table of Contents
Advertisement
Alert
90
Symptom
Semi-automatic Cal-
ibration does not
work.
☞
A calibration
reminder has been
set for the device.
The firmware on
the Combo and the
Rugby are not com-
patible.
An internal hardware
failure has occurred
within the Rugby.
Possible causes and solutions
The Semi-automatic Calibration
procedure could not be com-
pleted.
Repeat the procedure.
If the procedure is still
not successful, contact
an authorised service
centre.
To stop the alert from appearing,
either disable/update it, or send
the Rugby to be calibrated. Refer
to
4.3.3 Menu Set
2-
Calibration
alert
function.
This may only cause minor
issues, but to ensure the Rugby
and Combo perform optimally,
contact an authorised service
centre.
There is a serious fault with the
Rugby. Contact an authorised
service centre.
Troubleshooting
Advertisement
Table of Contents
