Leica Rugby CLA User Manual page 86

Screen Indication
Step 4 - Rotate the Rugby 90° and align Y-axis (Y+) towards the Combo
Screen Indication
Calibration successful:
When all four axes have been checked and the calibration process was suc-
cessful, the Rugby beeps for 3 seconds and all the axes show a tick mark
below. Following the successful alignment, the laser will turn off.
Calibration not successful:
If the Rugby encounters a problem and the calibration process was not suc-
cessful, the Rugby returns to the main screen and the Combo returns to the
calibration menu screen.
86
0015896_001
Description
Following this, the anima-
tion will suggest rotating the
Rugby 90° counter-clock-
wise, but rotating the Rugby
90° clockwise or 180° would
also be sufficient.
The aim is to align with an
axis not previously selected
during the process.
30 m (100 ft)
Y+
Description
Once the alignment process
has begun for the fourth
and final specified axis, an
hour glass icon indicates the
overall progress of the align-
ment.
When the axis is successfully
aligned, a tick icon can be
seen below, in place of the
hour glass shown earlier.
Semi-Automatic Calibration