Vertical Operation (Rugby Cla-Ctive Only) - Leica Rugby CLA User Manual

Reset grade value to
zero
Grade capability
Grade swap
3.9
Vertical plane of laser
light
Operation
While in grade entry mode, you can quickly change the grade value back to
zero by pressing the Up/Menu button and Down/Sleep button simultaneously.
Laser
Rugby CLH basic package
Rugby CLH
Rugby CLA‑ctive
The grade capability depends on the functionality package in opera-
☞
tion. Refer to
Example: Rugby CLA‑ctive
The Rugby CLA‑ctive can have up to 10.00% grade simultaneously in both the
X and Y axes or up to 15.00% grade in one axis.
Entering grades above 10.00% in one axis is only possible if the cross axis
grade is ±3% or lower.
The grade in the X and Y axes can be swapped from positive to negative
by changing the plus/minus sign in grade entry mode. Refer to
Entry-Grade entry by digit.
A typical application for this feature is road building.
Example: The Rugby is set up on the crown of the road and one axis is aligned
to the centreline. In order to make the cross axis grade fall to the right or left
hand side, simply change the plus/minus sign on the Combo grade screen.
Vertical Operation (Rugby CLA‑ctive only)
You can operate the Rugby CLA‑ctive lying on its side in order to create a
vertical plane of laser light for layout and alignment jobs.
16017_002
Rugby lying on its side
Grade capability
simultaneously in both
axes
up to 5%
up to 8%
up to 10%
2.2 Functionality Packages.
Combo screen when operating the
Rugby on its side.
Grade capability
in one axis
-
up to 8%
up to 15%
3.8 Grade
33