Battery Safety; Personnel Requirements; Eu Declaration Of Conformity - Goodwe ETC Series User Manual

User Manual V1.0-2023-04-30

2.4 Battery Safety

• The battery used with the inverter shall be approved by the inverter manufacturer. The
approved battery list can be obtained through the official website.
• Before installations, read through the corresponding battery's user manual to learn about
the product and the precautions. Strictly follow its requirements.
• If the battery is discharged completely, please charge it in strict accordance with the
corresponding battery's user manual.
• Factors such as: temperature, humidity, weather conditions, etc. may limit the battery's
current and affect its load.
• Contact after-sale service immediately if the battery is not able to be started. Otherwise,
the battery might be damaged permanently.
• Measure the DC cable using the multimeter to avoid reverse polarity connection. Also, the
voltage should be under the permissible range.
• Do not connect one battery pack to more than one inverter at the same time. Otherwise, it
may cause damage to the inverter.

2.5 Personnel requirements

• Personnel who install or maintain the equipment must be strictly trained, learn about
safety precautions and correct operations.
• Only qualified professionals or trained personnel are allowed to install, operate, maintain,
and replace the equipment or parts.

2.6 EU Declaration of Conformity

GoodWe Technologies Co., Ltd. hereby declares that the inverter with wireless communication
modules sold in the European market meets the requirements of the following directives:
• Radio Equipment Directive 2014/53/EU (RED)
• Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of Chemicals (EC) No 1907/2006
(REACH)
You can download the EU Declaration of Conformity on
GoodWe Technologies Co., Ltd. hereby declares that the inverter without wireless
communication modules sold in the European market meets the requirements of the following
directives:
• Electromagnetic compatibility Directive 2014/30/EU (EMC)
• Electrical Apparatus Low Voltage Directive 2014/35/EU (LVD)
• Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of Chemicals (EC) No 1907/2006
(REACH)
You can download the EU Declaration of Conformity on
WARNING
NOTICE
https://en.goodwe.com.
https://en.goodwe.com..
5
02 Safety Precaution