Section 4 Ami Bios Setup Utility; Starting - AXIOMTEK tBOX520-ADL-MR Series User Manual

The AMI UEFI BIOS provides users with a built-in setup program to modify basic system
configuration. All configured parameters are stored in a 16MB flash chip to save the setup
information whenever the power is turned off. This chapter provides users with detailed
description about how to set up basic system configuration through the AMI BIOS setup utility.
4.1

Starting

To enter the setup screens, follow the steps as below:
1. Turn on the computer and press the <Del> key immediately.
2. After pressing the <Delete> key, the main BIOS setup menu displays. You can access
other setup screens from the main BIOS setup menu, such as the Advanced and Chipset
menus.
Note: If your computer cannot boot after making and saving system changes with
Setup, you can restore BIOS optimal defaults by setting SW1 (see section
3.1.11).
It is strongly recommended that you should avoid changing the chipset's defaults. Both AMI and your
system manufacturer have carefully set up these defaults that provide the best performance and
reliability.
AMI BIOS Setup Utility
tBOX520-ADL-MR Series User's Manual
AMI BIOS SETUP UTILITY
SECTION 4
27