Display And Button Set - Fayat Group Dynapac CP2100 Instruction Manual

Pneumatic tire roller
Table of Contents

Advertisement

SYMBOL
Warning lamp, hydraulic oil
filter
Warning lamp, air filter
Warning lamp, battery
charging
Warning lamp, engine
temperature
Warning lamp, hydraulic oil
temperature
50

Display and button set

activated when the forward/backward lever is in the neutral
position.
Alarm descriptions
DESCRIPTION
4812314580EN
The parking brake symbol is shown when the
parking brake is activated.
= Low speed.
= Automatic water control (AWC). The sprinkling is
= Tire pressure.
= Sprinkler activation for edge cutter.
= High/low speed mode (in the center of the screen).
= Alarm display, see the table below for information.
FUNCTION
If the lamp is lit with the engine in maximum rpm, it shall
be necessary to replace the hydraulic oil filter.
If the lamp is lit with the engine in maximum rpm, it shall
be necessary to clean or replace the air filter.
If the lamp is lit with the engine running, the alternator is
not charging. Stop the engine and find the fault.
If the lamp is lit it means the engine is too hot. Stop
IMMEDIATELY the engine and find the fault. Refer to
the engine manual.
If the lamp is lit it means the hydraulic oil is too hot. Do
not operate the roller. Cool the oil making the engine run
in idle and locate the fault.
Operation
2020-01-06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac cp2100w10000511clc00961910000516vlc009620

Table of Contents