Table of Contents
Advertisement
1
4
5
Fig. - Removable steel ballasts
1. Side covers
2. Nut and counternut
3. Bolts
4. Bedplate
5. Ballast grooves
2020-01-06
Removable steel ballasts
The CP2100/CP2100W roller uses an innovative and patented
system of steel ballasts, which can be removed and installed
easily and quickly:
1. With the ballast box drained (without water and/or sand),
remove four side covers (1) from the ballast box.
2. Unscrew the nuts and counternuts (2) and four lower bolts
(3) of the bedplate in the steel ballasts. Remove the
bedplate (4) off the ballasts assembly.
2
3
3. Install or remove the ballasts, according to the necessity,
using the forks from a standard forklift. The ballasts
grooves (5) were projected so the forklift forks fit perfectly
and to easy their removal, installation and transport.
4. After installing or removing the ballasts in the box, mount
the bedplate, performing the reversal steps used to remove
them.
Distribute the steel ballast evenly in the box.
4812314580EN
Operation
55
Advertisement
Table of Contents
