Fayat Group Dynapac CP2100 Instruction Manual page 109

Pneumatic tire roller
Table of Contents

Advertisement

2
Fig. - Pivot bearings
1. Upper pivot bearing grease fitting
2. Lower pivot bearing grease fitting
1
Fig. – Air dryer filter
1. Cartridge
2020-01-06
Lubricate the upper/lower pivot bearing
1. Lubricate the grease fitting of the upper pivot bearing (1)
and the grease fitting of the lower pivot bearing (2)
operating the grease gun manually with five pump strokes.
2. Use the grease according to the lubricant specifications
recommended by DYNAPAC.
1
Replace the air dryer filter
To replace the filter, empty the compressed air and unscrew
the cartridge with suitable
Clean and grease the sealing surfaces and the fixing
Manually screw the cartridge until there is resistance, and
tighten half
turn.
4812314580EN
Maintenance - Every 250 hours
tool.
screw.
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac cp2100w10000511clc00961910000516vlc009620

Table of Contents