Fayat Group Dynapac CP2100 Instruction Manual page 92

EVERY SIX MONTHS (Every 1,000 hours of operation)
ANNUALLY (Every 2,000 hours of operation)
86
Scheduled maintenance and lubrication
POSITION
IN THE
FIGURE
- Check the Diesel engine valve
clearances
- Check the engine propulsion system
10 Replace the main and the
secondary air filters
Replace the air dryer filter
4 Replace the hydraulic oil filters
17 Replace the cab air filter
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
23 Replace the wheel gear oil
23 Check the wheel gear oil level
POSITION
IN THE
FIGURE
6 Replace the hydraulic oil
11 Clean the fuel tank
13 Clean the water tank
14 Clean the sprinkler system
- Check the pilot bearings
9 Replace the coolant
- Check the air conditioning
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
4812314580EN
ACTION
ACTION
NOTES
Refer to the engine manual
instructions.
Refer to the engine manual
instructions.
Machine equipped with
AOR
NOTES
Refer to the engine manual
instructions.
When equipped (option)
2020-01-06