Xerox Responsibilities; Preparing For Installation - Xerox 4050 Installation Planning Manual

Responsibilities

Xerox responsibilities

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 4050/4090 NPS
4.

4Preparing for installation

This chapter assists you in preparing for the installation of your Xerox
DocuPrint 4050 and 4090 NPS.
Preparing for installation is a responsibility shared by personnel at
your site and Xerox. Your service representatives are available to
discuss installation issues and to assist you in completing the site
installation tasks.
Prior to installation, you must select and prepare an appropriate
location for the DocuPrint system and order supplies. This chapter
helps you accomplish these tasks by providing the following
information:
•
A summary of your responsibilities and those of your Xerox
service representative
•
A checklist of installation planning activities.
For information on controller power and space requirements, refer to
the "Controller specifications and requirements" chapter of this guide.
For facts about printer power and space requirements, refer to the
"Printer specifications and requirements" chapter of this guide.
This section describes your site responsibilities and the
responsibilities of your service representatives. Included are some
joint responsibilities.
This section lists the responsibilities of the service representatives
and system analysts prior to, during, and after installation:
•
Site selection
— Assist in site selection
— Inspect and approve the site.
•
Installation
— Schedule the delivery of the hardware
— Monitor installation activities
— Assist you in ordering any supplies required
— Install the DocuPrint system.
4-1