Preparing For Installation; Responsibilities - Xerox DocuPrint 100 Installation Planning Manual

Responsibilities

Installation Planning Guide

4 Preparing for installation

This chapter assists you in preparing for the installation of your
Xerox DocuPrint 100/115/135/155/180 EPS. Use this chapter in
conjunction with the Getting Ready for Installation manual.
Preparing for installation is a responsibility shared by personnel at
your site and Xerox. Your Xerox representatives are available to
discuss installation issues and to assist you in completing the site
installation tasks.
Before installation, you must select and prepare an appropriate
location for the printing system and order supplies. This chapter
helps you accomplish these tasks by providing the following
information:
• A summary of your responsibilities and those of your Xerox
service representative
• A checklist of installation planning activities.
For information on controller power and space requirements, refer
to the "Controller specifications and requirements" chapter of this
guide. For facts about printer power and space requirements,
refer to the "Printer specifications and requirements" chapter of
this guide.
This section describes your site responsibilities and the
responsibilities of your service representatives. Some joint
responsibilities are included.
4-1