Face-Up Output Tray; Using The Manual Feed Tray; Feeding Paper Through The Manual Feed Slot - Xerox 4215 Operator's Manual

<
Step 4. Press the Online key to place the printer
online.

Face-up Output Tray

When you use special materials, it is
recommended that you use the Face-up Output
Tray as the output tray.
the manual feed slot to the Face-up Output Tray
is straighter and is less likely to jam on
special materials, i.e. transparencies.
Refer to "Installing the Face-up Output Tray,"
in Chapter 1, "Overview and Installation," for
instructions on how to install and use the
Face-up Output Tray.

USING THE MANUAL FEED TRAY

When you send a job to the printer and manual
feed has been selected as the paper source, the
following message displays:
NOTE: A paper jam can occur if paper is fed
into the manual feed slot before this message
appears. Paper jams and other errors are
accompanied by a beeper sound.

Feeding Paper through the Manual Feed Slot

Follow these steps when feeding a single sheet
of paper through the manual feed slot:
cut top 2"
MANUAL[Paper Size]
The paper path from
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide 4-7