Xerox 4215 Operator's Manual page 273

<
Print
Black Spots
or Marks
Contaminate
d first
Damaged
cut top 2"
Table D-2
Print Problem Solving
Explanation How to Correct
The paper 1.
has spots or paper used is the
marks that proper paper type as
repeat on specified in Appendix
G, "Paper Facts."
2.
replace the toner
cartridge.
Refer to Chapter 5,
"Care and
Maintenance," for
these procedures.
First prints Run ten prints to
after a remove contamination
Toner from paper path.
Cartridge or
Fuser
Wrinkles, 1.
creases, or and reload tray.
any paper 2.
not corrected, add
defects
present on fresh paper.
the prints, 3.
but not corrected, call your
noticeable
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
Ensure that the
If not corrected,
Flip the paper
If the problem is
If problem is not
C o n t i n u e d
cut 1">
D-31