Printer Configuration - Xerox 4215 Operator's Manual

<
2-32 Using the Control Panel
The parity on the printer should match the
setting on your host computer.
for parity are:
the factory default.
DTR Polarity The Data Terminal Ready (DTR)
Polarity menu item allows you to select whether
the DTR line on the serial interface is high or
low when the printer is ready to receive data.
The host setting must match the printer
setting.

PRINTER CONFIGURATION

Once the physical components of the printer are
connected, the printer software may need to be
set up, or configured, to meet the needs of
your office.
are establishing your own default settings.
These settings remain unchanged even through a
power off and on cycle.
Some of the printer configuration options deal
with the print functions, such as:
F
F
F
F
F
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
Odd, Even, or None.
*High is the factory default.
By configuring your printer, you
Printer language
Tray selection
PCL 5 font and page format settings
Print resolution
Automatic printing of the Start Page at
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
The settings
*None is
cut 1">