Xerox 4215 Operator's Manual page 240

<
B-2 Power Cord Requirements
Japan
1.
2.
3.
4.
Other Countries
1.
2.
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
The cord must be MITI approved.
The flexible cord must be a VCT or VCT F 3-
conductor cord with a minimum conductor
size of 1.50 square millimeters.
The cord must have a rated current capacity
of 12A.
The attachment plug must be an earth
grounding type JIS 8303 (15A, 125V)
configuration.
The cord fittings must bear the
certification mark of the agency
responsible for evaluation in a specific
country. Acceptable agencies include:
BSI (United Kingdom)
CEDEC (Belgium)
DEMKO (Denmark)
EANSW (Australia)
IMQ (Italy)
KEMA (The Netherlands)
NEMKO (Norway)
The flexible cord must be of a HAR
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
OVE (Austria)
SEMKO (Sweden)
SETI (Finland)
SEV (Switzerland)
UTE (France)
VDE (Germany)
cut 1">