Using The Manual Feed Tray For Envelopes - Xerox 4215 Operator's Manual

Xerox 4215: operator guide
Hide thumbs Also See for 4215:
Table of Contents

Advertisement

<

Using the Manual Feed Tray for Envelopes

Standard envelopes are printed one at a time,
using the manual feed tray.
When you send an address to the printer and
manual feed has been selected as the paper
source, the beeper sounds and the following
message displays:
NOTE: A paper jam can occur if an envelope is
fed into the manual feed slot before this
message appears. Paper jams and other errors
are accompanied by a beeper sound.
Feeding a Single Envelope through the Manual
Feed Slot Follow these instructions when
feeding a single envelope through the manual
feed slot:
NOTE: When you use the Manual Feed Tray, it is
recommended that you use the Face-up Output
Tray as the output tray.
"Installing the Face-up Output Tray," in
Chapter 1.
Step 1.
Push down on the manual feed tray tab to open
the tray.
Step 2.
Move the right and left adjustable feed guides
cut top 2"
MANUAL[Paper Size]
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
Refer to the section,
cut 1">
4-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

4219

Table of Contents