Last Page Is Not Ejected; When Using Pcl 5 Command Set Or Ibm Scs Or Ipds Emulations - Xerox 4215 Operator's Manual

<
If the Xerox IPDS option is installed, then
IPDS data also is supported by the printer.
NOTE:
must always be set for "Emulation sensing" to
function for processing IBM SCS or IPDS data.
To dedicate a communications port to receive a
specific printer language, refer to Chapter 2,
"Using the Control Panel."
how to do this, refer to "Printer Configuration
Examples" in Chapter 2.
Send a job from your host computer to be
printed.
your application software or host operating
system for specific instructions on printing.

LAST PAGE IS NOT EJECTED

If "Waiting..." still displays after the
printer activity has stopped and no more pages
are ejected, refer to the following.
When Using PCL 5 Command Set or IBM SCS or
IPDS emulations
You must manually eject the remaining page of
the document or wait until the printer times
out.
page prints.
follow these steps:
cut top 2"
The Other I/O (twinax or coax) interface
Refer to the manual provided with
When the printer times out, the remaining
To manually eject the page,
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
For an example of
cut 1">
4-3