Laser Safety - Xerox 4215 Operator's Manual

<
1-8 Overview and Installation
F
F
F
F

Laser Safety

The
standards.
With specific regard to the laser, the
equipment complies with laser product
performance standards set by governmental
agencies as a Class I laser product.
not emit hazardous light; the beam is totally
B
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
Do not handle the equipment if your hands
are wet. In a non-emergency situation, if
you must unplug the printer, first turn the
power off. Secondly, disconnect the power
plug from the wall outlet, by pulling on the
plug instead of the power cable.
Do not block the air vent with paper, etc.
If the printer is used in a small room for
many hours, make sure that adequate
ventilation is provided.
Do not deviate from the specifications
outlined in this guide.
Make sure the power switch is off before
inserting the power plug into the wall
outlet.
printer complies with appropriate safety
WARNING: Use of controls, adjustments
or performance of procedures other
than those specified in this manual
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
It does