Xerox 4215 Operator's Manual page 107

<
PRINTER CONFIGURATION EXAMPLES
The examples provided in this section
illustrate the step-by-step procedures for
changing the system configuration using the
control panel.
NOTE: For configuration of the twinax/coax
interfaces and IBM printer emulations, use the
Xerox Configuration and Resource and Utility
which is described in the Xerox Twinax Command
Reference and the Xerox Coax Command Reference.
NOTE: The following examples assume the printer
is currently set to factory default
configurations.
powering up the printer returns the printer to
its factory defaults.
F
F
cut top 2"
Pressing Online and Help while
Printer configuration examples:
A. Settings for the default paper tray and
the automatic tray swap.
B. Turning off the Start Page
C. Setting the default font for PCL 5
mode.
D. Setting the communications port to
priority Other I/O.
Interface configuration examples :
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide 2-41