Print Is Irregular Or Mottled - Xerox WorkCentre 6400SFS User Manual

Print is Irregular or Mottled

Probable Causes
The media is moist from humidity.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
One or more of the toner cartridges may be defective.
One or more of the imaging units may be defective.
The two grey dials on the fuser are adjusted for
envelope printing.
Solutions
Remove the moist media and replace it with new, dry
media.
Use Xerox-approved media. See
page 41.
Remove the toner cartridges and check each for
damage. If one or more is damaged, replace it.
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Rotate both grey dials on the fuser to the paper
setting.
WorkCentre 6400 Multifunction Printer
Troubleshooting
Supported Media on
207
User Guide