Printing On Special Media; Printing On Transparencies - Xerox WorkCentre 6400SFS User Manual

Printing on Special Media

This section includes:
•

Printing on Transparencies

• Printing on Envelopes
• Printing on Labels
• Printing on Glossy Paper
• Printing on Custom Size Paper
Printing on Transparencies
Transparencies can only be printed from Tray 1. For best results, use only recommended Xerox
transparencies.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/WC6400supplies.
Caution: Damage caused by using unsupported paper, transparencies, or other specialty media is
not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total
Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside
these areas; please contact your local representative for details.
See also:
www.xerox.com/paper
www.xerox.com/europaper
Guidelines
• Remove all paper before loading transparencies in the tray (Tray 1 only).
• Handle transparencies by the edges using both hands. Fingerprints or creases can cause poor print
quality.
• Do not load more than 20 transparencies in Tray 1. Overloading the tray can cause the printer to
jam.
• Do not use transparencies with stripes on the side.
• Do not fan transparencies.
• After loading transparencies, change the paper type at the printer's control panel.
• In the printer driver, select either Transparency as the paper type or Tray 1 as the paper source.
on page 53
on page 54
on page 54
on page 55
on page 55
Recommended Media List (United States)
Recommended Media List (Europe)
WorkCentre 6400 Multifunction Printer
Printing
53
User Guide