Xerox WorkCentre 6400SFS User Manual page 188

Troubleshooting
2. Pull the lever, and then open the right side door.
3. Open front door, and then raise the control panel.
Warning: The area around the fuser may be hot. Use caution to avoid injury.
Note: Be careful to not touch the transfer belt or the transfer roller. Fingerprints on these surfaces
may degrade print quality.
4. Push the green levers up, and open the fuser cover.
5. Carefully pull out the jammed media.
188 WorkCentre 6400 Multifunction Printer
User Guide
6400-158
1
2
6400-160
1
6400-159