Collating Copies - Xerox WorkCentre 6400SFS User Manual

Specifying 2-Sided Originals or Copies
When you use the document feeder with 2-sided originals, one or both sides can be scanned for
copying. You can also create 1-sided or 2-sided copies.
To select the sides to copy and print:
1. Access the Copy tab on the touch screen.
2. Select one of the following options under 2-Sided Copying.
• 1 –> 1 Sided: Scans only one side of the originals and produces 1-sided copies.
• 1 –> 2 Sided: Scans only one side of the originals and produces 2-sided copies.
• 2 –> 2 Sided: Scans both sides of the originals and produces 2-sided copies.
• 2 –> 1 Sided: Scans both sides of the originals and produces 1-sided copies.
3. If you selected 2-sided copies and you want the images on side 2 to be rotated 180 degrees, select
Rotate Side 2.

Collating Copies

When you make several copies of a multi-page document, you can have the copies automatically
collated. For example, if you are making three single-sided copies of a six-page document, the copies
are printed in this order when you select collated:
1, 2, 3, 4, 5, 6; 1, 2, 3, 4, 5, 6; 1, 2, 3, 4, 5, 6
If you select uncollated, the copies are printed in this order:
1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6
To choose collated or uncollated copies:
1. Access the Copy tab on the touch screen.
2. If you want the copies collated, select Collated under Copy Output.
3. If you do not want the copies collated, select Uncollated. If a finisher is installed:
a. Press the More button under Copy Output.
b. Select Uncollated under Collation on the left side of the window.
c. If you also want your copies stapled, see
d. Press the Save button in the upper-right corner of the window.
Stapling Copies on page 88.
WorkCentre 6400 Multifunction Printer
Copying
87
User Guide