Fax Settings - Xerox Phaser 6128MFP User Manual

Fax Settings

Item
Interval Timer
Number of Redial
Int. of Redial
Ans Select:
Auto Answer Fax
Auto Ans. TEL/FAX
Auto Ans. Ans/FAX
Line Monitor
Ring Tone Volume
Line Type
Dialing Type
Description
Specifies the interval time between resend attempts.
Specifies the number of redial attempts.
Specifies the time between redial attempts.
Specifies the receiving mode:
TEL Mode
•
Automatic fax reception is turned off. You can receive a
fax by picking up the handset of the external phone, and
then pressing the remote receive code, or by setting
OnHook to On (you can hear voice or fax tones from the
remote machine), and then pressing Start.
• FAX Mode
A fax is automatically received.
• TEL/FAX Mode
When the printer receive an incoming fax, the external
telephone rings for the time specified by Auto Ans.
TEL/FAX, and then the printer automatically receive the
fax. If incoming data is not a fax, the printer beeps the
internal speaker.
Ans/FAX Mode
•
The printer can share one telephone line with an
answering machine. In this mode, the printer will monitor
the fax signal and pick up the line if there are fax tones. If
the phone communication in your country is serial, this
mode is not available.
• DRPD Mode
Before using the Distinctive Ring Pattern Detection
(DRPD) option, distinctive ring service must be installed
on your telephone line by the telephone company. After
the telephone company has provided a separate number
for faxing with a distinctive ring pattern, configure the fax
setup to monitor for that specific ring pattern.
When FAX Mode is enabled, specifies how long the printer
waits before answering an incoming call. Values range from 0
to 255 seconds.
When TEL/FAX Mode is enabled, specifies how long the
printer waits before answering an incoming call. Values range
from 0 to 255 seconds.
When ANS/FAX Mode is enabled, specifies how long the
printer waits before answering an incoming call. Values range
from 0 to 255 seconds.
Specifies the volume of the external phone (line monitor).
Specifies the volume for the incoming faxes.
Specifies the default line type.
Specifies the dialing type.
Phaser® 6128MFP Multifunction Printer
116
Description of Menu Items