Scanning to a FTP Server
If you have not created an address for the printer to use, see the
Overview
on page 26.
To scan to a FTP server:
1. On the printer control panel, click the Scan button.
2. Select Server (FTP), and then press the OK button.
3. Select Scan to, and then press the OK button.
4. Press the Up Arrow or Down Arrow button to select the address that points to your
computer, and then press the OK button.
5. Press the Start button.
The printer scans the document and the image is placed on the FTP server.
See also:
Adjusting Scanning Options
on page 85
Phaser® 6128MFP Multifunction Printer
82
Scanning to a FTP Server
Installation and Setup