Xerox Phaser 6128MFP User Manual page 74

Setting Auto Exposure
Papers that are "less-white," newsprint or ivory colored for example, can cause the printer
to put toner on the page so that the printed output has a background that matches the
original. The Auto Exposure setting removes the light or close to white color and only the
image itself is printed. Auto Exposure is turned on by default.
Turning Auto Exposure On or Off
To turn Auto Exposure on or off:
1. On the printer control panel, press the Copy button.
2. Select Auto Exposure, and then press the OK button.
3. Press the Up Arrow or Down Arrow button to select On or Off, and then press the
OK button.
Setting the Auto Exposure Level
To set the auto exposure level manually:
1. On the printer control panel, press the System button.
2. Select Defaults Settings, and then press the OK button.
3. Select Copy Defaults, and then press the OK button.
4. Select Auto Exposure Level, and then press the OK button.
5. Press the Up Arrow or Down Arrow button to select the Auto Exposure level, and then
press the OK button.
Adjusting Color Balance
The Color Balance control allows you to adjust the print color of your printer. Three density
settings exist for each of the four colors: yellow, magenta, cyan, and black. The Low,
Medium, and High density settings adjust the output based on the level of color saturation.
Examples of low density areas include faces and sky.
1. On the printer control panel, press the System button.
2. Select Defaults Settings, and then press the OK button.
3. Select Copy Defaults, and then press the OK button.
4. Select Color Balance, and then press the OK button.
5. Select the color that you would like to adjust, and then press the OK button.
6. Select the density level that you would like to adjust, Low, Medium, or High, and then
press the OK button.
7. Adjust the density setting with the Up Arrow or Down Arrow.
Adjusting the setting negatively lowers (lightens) the density, and adjusting the setting
positively will increase (darken) the density.
8. Press the OK button to accept the new setting.
9. You can select another color and adjust it's density, or press the Exit button to leave
this portion of the menu.
To adjust the Color Balance default setting, see
page 72.
Selecting the Default Copy Settings
Phaser® 6128MFP Multifunction Printer
74
Adjusting Copying Options
on