Scanning To A Shared Folder On Your Computer - Network; Setting Up Scanning To A Computer; Scanning To A Computer On A Network - Xerox Phaser 6128MFP User Manual

Scanning to a Shared Folder on Your
Computer - Network

Setting Up Scanning to a Computer

Before using the printer as a scanner on a network, you must do the following:
1. Create a shared folder on the computer.
2. Create a new address in CentreWare IS or the Address Book Editor pointing the scanner
to the computer.
Note: For more information, see the

Scanning to a Computer on a Network

If you haven't created a shared folder and an address for the printer to use, see
Scanning to a Computer
To scan to a computer on a network:
1. On the printer control panel, click the Scan button.
2. Select Computer (Network), and then press the OK button.
3. Select Scan to, and then press the OK button.
4. Press the Up Arrow or Down Arrow button to select the address that points to your
computer, and then press the OK button.
5. If you want to change any other scan settings, press the Up Arrow or Down Arrow
button to select the setting and make your changes.
6. Press the Start button.
The printer begins scanning your documents to the shared folder on your computer.
See also:
Adjusting Scanning Options

Scanning to a Shared Folder on Your Computer - Network

Installation and Setup Overview
on page 80.
on page 85
Phaser® 6128MFP Multifunction Printer
80
on page 26.
Setting Up