Cleaning The Printer; Cleaning The Document Glass; Cleaning The Exterior - Xerox Phaser 6128MFP User Manual

Cleaning the Printer

This section describes how to clean the printer in order to maintain it in good condition and
print clean printouts all the time.
Warning:
Be sure to turn off and unplug the printer before accessing the interior of the
printer for cleaning, maintenance, or fault clearance. Access to a live printer's interior can
cause electric shock.

Cleaning the Document Glass

Clean the document glass with a moistened lint-free cloth only. Do not use any kind of
cleaning agent to clean the glass. Wipe the glass in one direction to move any debris to the
edge of the glass.
1. Automatic document feed (ADF) paper path
2. Automatic document feed (ADF) cover
3. Flatbed document glass
4. Automatic document feed (ADF) glass

Cleaning the Exterior

Clean the exterior of the printer about once a month. Wipe the parts with a wet but well-
wrung soft cloth. Then wipe with another dry soft cloth. For stubborn stains, apply a small
amount of neutral detergent, and gently wipe the stain off.
Note: Do not spray the detergent directly on the printer. The liquid detergent may enter
the printer through a gap and cause problems. Never use cleaning agents other than water
or neutral detergent.
1
4 3
Phaser® 6128MFP Multifunction Printer
154

Cleaning the Printer

2
6128mfp-108