Xerox Phaser 6128MFP User Manual page 117

Item
Junk Fax Filter
Remote Receive
Remote Rcv Tone
Send Header
Company Name
Your Fax Number
Fax Cover Page
DRPD Pattern
Forward Settings
Fwd. Settings Num
Description
When set to On, incoming faxes are only accepted from
numbers registered in the Address Book.
Specifies whether to receive a fax by pressing the remote
receive code on the external telephone after picking up the
handset of the telephone. When set to On, a fax can be
received by pressing the remote receive code on the
external telephone.
Specifies the tone in two digits (00-99) when Remote Receive
is set to On.
When set to On, the sender record is printed at the head of
the fax.
Specifies the sender name to be recorded in the
sender report.
Specifies your telephone number, which is printed at the top
of each page sent from your printer.
When set to On, automatically prints a fax cover page. When
set to Off, does not print a fax cover page.
Specifies a distinctive ring pattern for use with DRPD service.
DRPD Patterns are specified by your telephone company. The
patterns provided with your multifunction printer are shown
below, with Pattern 1 at the top and Pattern 5 at the bottom:
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Specifies when the printer should forward all of the outgoing
faxes to a specified destination.
Specifies the number that outgoing faxes are forwarded to.
Phaser® 6128MFP Multifunction Printer
117
Description of Menu Items
6128mfp-130