Output Adjustments - Xerox Phaser 6128MFP User Manual

Setting the Margins for a Single Job
1. Place the document to be copied on the document glass.
2. On the printer control panel, press the Copy button.
3. Select the margin that you would like to change, and then press the OK button.
Margin Top/Bottom
•
• Margin Left/Right
• Margin Middle
4. Use the Up Arrow or Down Arrow button to adjust the margin, and then press the
OK button.
5. Repeat the steps for other margins, and then press the Exit button.
6. Press the Start button to begin copying.

Output Adjustments

You can change the following output adjustment settings:
• Collating Copies on page 76
Collating Copies
When you make several copies of a multi-page document, you can collate the output. For
example, if you are making three single-sided copies of a six-page document, the copies
are printed in this order when you select collated:
1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6
If you select uncollated (default), the copies are printed in this order:
1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6
To select a collating option:
1. On the printer control panel, press the Copy button.
2. Select Collated, and then press the OK button.
3. Select Off, On, or Auto, and then press the OK button.
Note: The setting default is Auto, meaning the ADF collation is turned on.
Phaser® 6128MFP Multifunction Printer
76
Adjusting Copying Options