Loading Paper; Loading Paper In The Paper Tray - Xerox Phaser 6128MFP User Manual

Xerox phaser 6128mfp: user guide
Hide thumbs Also See for Phaser 6128MFP:
Table of Contents

Advertisement

Loading Paper

This section includes:

Loading Paper in the Paper Tray

Loading Paper in the Manual Feed Slot
Loading Paper in the Paper Tray
Use the paper tray for a wide range of media including:
Plain paper
Card stock
Labels
Glossy paper
Specialty media including business cards, postcards, trifold brochures, and
weatherproof paper
Pre-printed paper (paper already printed on one side)
Custom size paper
See also:
About Paper
on page 45
In addition to plain paper, the paper tray can use various other sizes and types of print
media, such as envelopes.
Make sure of the following points when loading paper in the paper tray:
You can load up to 250 sheets or a stack of paper (65–220 g/m
cover) less than 15 mm high. Sizes can start from 3 x 5 in.
Paper tray accepts print media within the following dimensions:
Width: 76.2–216.0 mm (3–8.5 in.)
Length: 127.0–355.6 mm (5–14 in.)
Make sure of the following points to avoid any troubles during printing:
Do not load different types of paper at the same time.
Use high quality paper for laser printers to print at high quality. See
page 45.
Do not remove or add paper to the tray when printing, or if there is any paper still in
the tray. Doing so may cause a paper jam.
Do not put any objects other than paper on the tray. Also, do not push or force down
the paper tray.
Always load paper short-edge feed.
on page 48
on page 50
Phaser® 6128MFP Multifunction Printer
48

Loading Paper

2
, 17–40 lb. Bond, 40–80 lb.
About Paper
on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents