Scanning To A Folder On Your Computer - Usb - Xerox Phaser 6128MFP User Manual

Scanning to a Folder on Your Computer - USB

Note: This procedure assumes you have Express Scan Manager installed on your computer.
For more information on Express Scan Manager, see
page 40.
If you are connected by a USB cable:
1. On the printer control panel, click the Scan button.
2. Select Computer (USB), and then press the OK button.
3. Select File Format:
a. Press the OK button.
b. Press the Up Arrow or Down Arrow button to select the format.
c. Press the OK button.
4. Press the Start button.
A Xerox Phaser 6128MFP Scanner dialog box will appear on your computer asking
you which application to launch to manage the scanned file. Select Phaser 6128MFP
Express Scan Manager, and then click OK.
Note: Select the Do Not Ask Again checkbox to set your selection permanently.
The printer scans your documents to the output destination specified in Express
Scan Manager.
See also:
Adjusting Scanning Options
Scanning to a Folder on Your Computer - USB
on page 85
Phaser® 6128MFP Multifunction Printer
79
Setting Up Scanning - USB on