Power Saver Mode; Power Saver Mode 1 (Printer); Power Saver Mode 2 (System) - Xerox Phaser 6128MFP User Manual

Power Saver Mode

Power Saver Mode

Power Saver Mode 1 (Printer)

The printer is equipped with Power Saver Mode 1 to reduce power consumption to 35 W or
less when it is left idle.
When no print data is received for 30 minutes (default), the printer will enter Power Saver
Mode 1.
The time range that can be specified for the printer to enter Power Saver Mode 1 is 5 to 60
minutes. The time required to exit from Power Saver Mode 1 to a print-ready status is
about 20 seconds.
The printer automatically cancels Power Saver Mode 1 once it receives data from the
computer. To cancel Power Saver Mode 1 manually, press the Wake Up button.

Power Saver Mode 2 (System)

Power Saver Mode 2 controls the scanner lamp. When the scanner is not being used, the
lamp turns off after the time specified for Power Saver Mode 2. The time range that can be
specified for the printer to enter Power Saver Mode 2 is 5 to 120 minutes. Consumption of
power during Power Saver Mode 2 is 17W. The default setting for Power Saver Mode 2 is 30
minutes after Power Saver Mode 1 starts.
The printer automatically cancels Power Saver Mode 2 once it receives data from the
computer. To cancel the Power Saver Mode 2 manually, press the Wake Up button.
Phaser® 6128MFP Multifunction Printer
22