User Details Setup - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250

User Details Setup

The User Details Setup button can be accessed on the Login Setup / Auditron
Administration screen.
The following User Detail settings can be changed:
UserID Characters: If required, you can change the indication that appears as
UserID on the System Administrator Login screen when the Log In/Out button on
the control panel is pressed to such as UserName or Number. The alias can be
set to 1 to 15 characters.
Hide UserID: You can set the way in which the User ID is shown as it is being
input. Use this feature to strengthen security as required. Select Show, as you
enter the User ID, the characters are echoed on the screen in the normal way.
Select Hide, as you enter the User ID, the character string is hidden as a row of
asterisks (*****).
Account ID Characters: If required, you can change the indication that appears
as AccountID on the System Administrator Login screen when the Log In/Out
button on the control panel is pressed to such as AccountName or Number. The
alias can be set to 1 to 15 characters.
Hide Account ID: You can set the way in which the Account ID is shown as it is
being input. Use this feature to strengthen security as required. Select Show, as
you enter the Account ID, the characters are echoed on the screen in the normal
way. Select Hide, as you enter the Account ID, the character string is hidden as
a row of asterisks (*****).
Failed Access Log: In order to detect unauthorized access, if the number of
times that authentication fails within a set time exceeds the Failed Attempts value
set here, then an error is logged. Select Failed Access Log, select On and with
the numeric keypad enter the number of failures.
Store User Details: You can set the destination to save authentication
information. Select NVM or hard disk.
DocuColor 240/250 Training and Information Guide 119