Tray 6 (High Capacity Feeder) - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250

Tray 6 (High Capacity Feeder)

The High Capacity Feeder is primarily intended for use as a large quantity feeder
and accommodates stock from Executive (7.25" x 10.5") LEF to 8.5" x 11" LEF.
The High Capacity Feeder can hold paper of weights between 64 gsm to 220
gsm, and can hold a maximum of 2000 sheets of 80 gsm paper. Stock can only
be loaded long edge feed.
After stock is loaded into the High Capacity Feeder, a pop-up window may
appear asking you to change or confirm the type and size of the stock. The tray
may not be ready for use until you change or confirm the size and type of stock.
NOTE: This feature may be enabled/disabled by the System Administrator.
Alternatively, you can change the paper size and paper type by accessing the
Paper Tray Attributes screen from the System Administration Menu.
Your machine also alerts you if the High Capacity Feeder is selected for a print
job where the stock selected does not match the stock currently loaded.
It also warns you if the Feeder runs out of stock during a job.
DocuColor 240/250 Training and Information Guide 100